- 55%

Xvive P3 Wireless XLR Bluetooth Receiver, Bluetooth Adapter for Speakers, Audio Mixer, PA Systems, DJ System(P3 XLR Bluetooth)

Original price was: $109.99.Current price is: $49.99.

Added to wishlistRemoved from wishlist 0
Add to compare
Category: Tag:


Price: $109.99 - $49.99
(as of Jan 17, 2025 18:32:04 UTC – Details)

Product Description

P3P3

This compact device enables your mixer or active PA speaker cabinet to receive wireless Bluetooth audio from a smartphone or computer. Simply plug P3 into an XLR input on your mixer or powered speaker, pair your Bluetooth device, and get the party started! The unit’s built-in rechargeable battery provides 8 hours of operation. Two P3s can be linked to receive a stereo signal. P3 receives Bluetooth signals from up to 100 ft away, making it a practical tool for weddings, events, dance parties and more.

P3P3

DACDAC

WEDDINGWEDDING

Small-scale Performances

The P3 Bluetooth XLR receiver is an indispensable partner for your performances as it removes the hassle of cables and produces a sound quality that is comparable to cable connections.

play music in  churchplay music in  church

Music Concerts

Are you tired of experiencing interference during music concerts? Don’t let your performance be hindered by poor connectivity.

outdoor partyoutdoor party

Outdoor Party

This is particularly relevant in outdoor music party where such convenience is paramount.

DJ SHOWDJ SHOW

Wedding DJs

The effortless connection of mobile devices to simplify music playback is an ideal solution to eliminate cumbersome cord arrangements.

XLR output XLR male, balanced Output level +4 dBu Bluetooth profiles 5.3, A2DP, AVRCP Bluetooth range Up to 100 feet Battery life Up to 8 hours Recharging time Up to 2 hours A2DP frequency response 20 Hz – 20 kHz DAC resolution 16-bit, 48 kHz

Stereo/Mono: compatibility with virtually any audio mixer, or active PA system, DJ controller with an XLR mixer input; Easy-to-use Bluetooth connectivity for setup in seconds wireless link two P3 together for cable free Stereo Playback
Plug and Play: P3 wireless XLR device enables your mixer or active PA speaker cabinet to receive wireless Bluetooth audio from a phone, PAD, tablet computer.
Simply plug P3 into an XLR input on your mixer or powered speaker, pair your Bluetooth device, and get the party started
Faster Speed, Farther Coverage: BT 5.3, A2DP, AVRCP and range of up to 100 feet, making it an ideal device for broadcasting music.
P3 is a practical tool for weddings, events, dance parties, and more. It provides stable connectivity without obstacles, which gives ample coverage for any occasion.
DAC Resolution 16bit,48KHz: P3 features a DAC resolution of16-bit,48KHz,making it an ideal device for stream your audio entertainment from your smart phone/pad/ tablet with perfect sound quality
8H Battery Life: The unit has a built-in rechargeable battery that provides up to 8 hours of operation and can be charged through the USB Type-C port

Customers say

Customers find that the wireless audio adapter works well for microphones and sound projects. They appreciate the clear sound quality with no noticeable dropouts or delay. The adapter is easy to set up and use, with a solid build quality and reliable performance. The signal quality is excellent, with no noticeable dropoff between speakers.

AI-generated from the text of customer reviews

8 reviews for Xvive P3 Wireless XLR Bluetooth Receiver, Bluetooth Adapter for Speakers, Audio Mixer, PA Systems, DJ System(P3 XLR Bluetooth)

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Rdeschain

    Impressed this singer who always said he’d never go wireless!
    It only takes one frustrating experience during a live performance to turn a singer off of wireless for life! I’ve had more than one over the years, some due to limited range/interference, but mostly batteries dying mid performance. I said I’d never go wireless again.In addition to leading Sunday Worship, I am also fronting a classic rock cover band for fun on the weekends. Our sets are high energy, and we play in a wide variety of settings. Some venues provide plenty of room to move, and I found myself wanting more freedom to cover the stage, engage with my bandmates, and generally bounce around and have a good time! I wasn’t thrilled about going wireless, but I also don’t need to trip over a mic cable. Also, I LOVE my mic! A wireless mic of comparable quality was going to easily run me $400-500. Last but not least, I use a little pedal to provide some reverb and compression. I was unsure if the wireless setup would play well with my pedal.Then I saw the X-Vive U3! It was getting rave reviews, was priced well, and would let me keep my beloved wired mic. With Amazon’s return policies and an upcoming gig, I figured I’d give it a try. Worst case I could return it if it failed to meet expectations.I was/am impressed! Super easy to use and set up out of the box. It’s small and sleek, but solidly built. Had about a 40% charge out of the box, and the included double micro-USB cable brought it to 100% quickly.I tested it at home with my pedal and a keyboard amp. Mic –> Transmitter –> Receiver –> Pedal –> XLR cable –> amp. Worked great!At the gig I knew range would not be an issue, since it only need to reach my pedal, which I keep by the monitors at my feet. Sound was outstanding! I observed no latency or signal degradation at all.Most impressive was the battery life. We typically do a 3 hour gig separated into 3 sets with 5-10 minutes between. My intent was to charge the unit between sets, but at the end of the 1st set the LED indicator for 50% power had not yet come on. So I put off the recharge. End of 2nd set, same thing! Still above 50% charge! This little unit went the entire 3 hours and never got below 50%! Amazing!Got another gig coming up, so hopefully we’ll see a repeat performance from the U3.

    Helpful(0) Unhelpful(0)You have already voted this
  2. dcos

    Works great, but…..
    I bought this to use with a Crown CM-311A headset mic. It’s very easy to use, just plug in, turn on, and it syncs right up. Sound and range both good. I was walking around 40 or 50 feet from the sound board with no drop outs. The problem I have is that it makes a high whining noise when plugged into the Crown mic. I have an Audio Technica mic that it doesn’t make this noise with, but the Crown is a better sounding mic. I contacted the manufacturer and they said some condenser mics with preamp circuitry make some noise. They suggested using a short extension mic cord to separate the wireless from the mic. I am going to try this, but not real happy about it, as it’s just more stuff to worry about when on stage. I would rate this 5 stars if not for this problem, but I am going to keep it since I like everything else about it and I can make it work.Update 5/23. I’ve used this system for about a year and a half and been very happy. Lately though, it has started to change channels all by itself when I’m not even touching it. If I squeeze the case, it will make it change but when I’m on stage I’m not touching it. Really makes it unusable on stage. The battery life in the transmitter seems to be getting shorter also. Changing my rating from four to 2 stars because of the problems and relatively short lifespan of the system.Update 8/16/23. I contacted Xvive and told them about my problem. They emailed back and said it’s out of warranty but would give me a discount on another system. After a couple more exchanges and a video of the problem, they agreed to replace the system at no charge. That’s awesome customer service and I’m very happy with the outcome. I really love this wireless, it’s much better sound wise than a cheaper system I bought from another manufacturer for a dynamic mic.

    Helpful(0) Unhelpful(0)You have already voted this
  3. TheCoin

    Clean audio
    I am very happy with this product. It connects quickly to my Bluetooth sources and reproduces crisp clean audio from the source!Great battery life after every charge! It also works while charging if needed.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Jorge Z.

    Escribí antes de comprar una pregunta para saber si venían los dos pero solo viene uno solo

    Helpful(0) Unhelpful(0)You have already voted this
  5. Luis Gerardo

    Es lo que esperaba recibir, buen producto y lo utilizo como remoto entre el micrófono y la mescladora.

    Helpful(0) Unhelpful(0)You have already voted this
  6. ABHISHEK SHARMA

    Good, value for money ,easy setup ,Using it for RTA mic, good for beginners

    Helpful(0) Unhelpful(0)You have already voted this
  7. Mr Steven J Armitstead

    Ease of use, good quality sound.

    Helpful(0) Unhelpful(0)You have already voted this
  8. gerardo

    A dire il vero. Mi piace tutto di questo prodotto..

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Xvive P3 Wireless XLR Bluetooth Receiver, Bluetooth Adapter for Speakers, Audio Mixer, PA Systems, DJ System(P3 XLR Bluetooth)
    Xvive P3 Wireless XLR Bluetooth Receiver, Bluetooth Adapter for Speakers, Audio Mixer, PA Systems, DJ System(P3 XLR Bluetooth)

    Original price was: $109.99.Current price is: $49.99.

    Best Deals for all new
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart