SXhyf Rear View Mirror Phone Holder, 2023 Rotatable and Retractable, Universal Mount, Cell Car Fit for iPhone 11 12 13 14 Pro Max Samsung All Phone

Does what I need it to do.
The only thing I would change is the extension was one inch longer and a second support and the bottom of the mirror bracket as this would be a bad place for mirrors with tilt levers. My mount is installed just to the right of my sensor; it works for the one vehicle but would be a horrible fit for our Honda Element.

Unfortunately, it’s NO from me.
Hi, I loved the idea of hanging my cell phone to the side of the mirror. But, unfortunately this mount is a NO-GO…so let me explain. 1. Placement, this holder is quite awkward while trying to mount. It involves 2 spring loaded clamps of which you press down. Depending on your hand size and strength this has a few problem, and I found it to be quite problematic. I think the mount might be easier if it had a different way to clamp it. An example, a scissor type clamp so your hands don’t have clearance issues. Or even a woodworking type (F?) clamp. Or just a clamp that you could screw in from the bottom. 2. Position issues. When trying to set the clamp, again this should be re-engineered too. The arm of this mount is just not long enough for a decent position. I have a Samsung S21, and I could not mount the phone to the left side vertically. This of course means their is no-way a phone could be mounted to the side of the mirror…in a horizontal position. 3. Blocked Visual Issues. If you manage to get the clamp on the mirror, and the phone in the other clamp. You will now have issues with the amount of visual real estate that remains. I am in a very large truck (2015 Silverado 2500) with a huge windshield, and the mount/phone just took up too much of my view. 4. I think if the cell clamp, was approximately 1.5 inches wider it might a make a huge difference, not to mention a .75 inch deeper cell clamp again would be huge. My cell phone had to be taken out of my case to clamp it into the holder. Than is unacceptable. As for the Arm issue. If the arm had about and additional 4 inches(?) it would clear the mirror allowing vertical and horizontal positioning. The neck comes out, but just not enough. The design of the Rear View Phone Holder could be a really nice set-up with a few small modifications. But, as for now: I would not recommend this unit.

Doesn’t work if you only have 2 hands…..
It took two of us to get it installed on the rear view mirror because the springs are so tight and the space you are working in is small. But once installed it appeared that it would work well but when you squeeze the phone holder part to open the arms to put the phone in, the arms do not stay open, you have to hold them open while trying to insert the phone. My last holder was a similar concept but once open they clicked in place and only shut on the phone when you pressed the pressure pad then they snapped closed. I was surprised that these didn’t work the same. The phone was difficult to insert into the phone holder and the first bump in the road the phone flew out of the holder and landed on the floor. I would not recommend this product. I gave this three stars because the concept is good but the product needs work.

Perfect auto phone holder
My dashboard don’t have an area for a phone mount. This one is perfect. Snaps to you rear view and it’s made very sturdy. Easy to connect phone with NO Raddle!!

Once I tried to install it some of screws threads are damaged…more over one important thing is it occupies the rear view mirror by 90 %…if you use the rear view mirror then this product is not for you…Rear view mirror are sticked in windshield and it is not meant to hold the weight so you will lose your rear view mirror if you use it….. overall the quality of the product is worst…. don’t waste your money

This is so much better than my previous air vent, magnetic pole holders in the car! Easy to install and adjustable!